Software downloads

ICT is a tool for:

With the software Data Logger Transfer, you will be able to :

• Setup the instruments,
• Download and display the trends,
• Display real time values,
• Display data in curves or table,
• Export automatic reports in Word (.docx format), 
• Export data into Dataview (.dvb files) or into Excel

Compatible with Windows 7, 8, 8.1 and 10.

Attention: DataView is not provided with the software Data Logger Transfer

Installation

To upgrade your camera, you need to download the CameraLoader_Installer software.
Once installation has finished, run the program, select your language in the top right-hand corner and click on "Start".

Then, you have to follow the instructions inside the loader.

Loader language: French, English

Firmware language: French, English, Spanish, Italian, German, Chinese, Finnish, Swedish, Czech, Romanian, Polish, Portuguese, Dutch, Turkish, Korean

Compatibility: Windows 8, Windows 10, Windows 11

The MTLink software allows you to control the C.A 6165 multi-function electrical equipment tester.

Funcions:
MTLink software is a tool for:

• Instrument configuration,
• Automatic scripts development,
• Downloading and viewing data in memory,
• Creating reports from this measurement data.

The software is available in 6 languages: German, English, Spanish, French, Italian and Portuguese.

For installation, extract the zip file into a single folder, then run the setup

SCPI order booklet for the CA 8345 so that you can integrate your product in a system. It will enable your system's software to control your CA 8345 remotely.

This PC software makes it very simple to :

- Recover the data from the CA 1310 sonometer.

- Collect the data in the real time from the instrument currently connected ton the PC.

System : Windows 7, Windows 8, Windows 10 & Windows 11

Languages : French, English, German, Spanish, Italian, Swedish, Finnish, Danish.

Below are the links to download the latest versions of CA Link, CE Link and Machine Link.  

The PEL Transfer software can be used to control the PEL51, PEL52, PEL102, PEL103, PEL104, PEL105, PEL106, PEL112, PEL113 and PEL115 power and energy loggers.

The PEL Transfer software is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Performing instantaneous acquisition operations,
• Displaying the data in the form of tables or graphs,
• Exporting the measurement data into (*.dvb files) or into a spreadsheet.

This evolution brings new features:
- Add czech language
- bugs fixed.

Compatible with Windows 7, 8, 8.1 , 10 and 11
Caution : DataView is not supplied with the PEL Transfer software

EasyScope

Designed for METRIX DOX series oscilloscopes, EasyScope lets you :

Data processing (CSV file);
Import screenshots and configurations;
Send SCPI commands;
Communicate (to PC or printer)
Store recordings on USB key.
 

Compatible with the following devices:

DOX2025B
DOX2070B
DOX2100B
 

Version: v1.01.02.01.22

Update date :

26/07/2024

Warning : this firmware version v1.13 is only compatible with v6.3 of the SX-Metro software

Manual firmware upgrade for the following oscilloscopes : OX 9062, OX 9102, OX 9104, OX 9304, OX 9302-BUS.

Please follow the recommendations in file : scopix_IV_firmware_installation_manual_procedure.pdf

To upgrade your oscilloscope, you need to download the "x04726n00_scopixiv_upgrade.zip"

MTT Machine Tester Link Software V1.4.6

The MTT software allows you to control the instrument and analyse the measurements made with your CA 6161 / CA 6163.

Main functions

The MTT software is a tool for:

Configuration of the instrument,
Downloading and viewing data in memory,
Generation of reports from the measurement data.

• Configuration of the instrument,
• Downloading and viewing data in memory,
• Generation of reports from the measurement data,
• Creating Auto Script(s)
• Creating Customized Visual Inspection(s)

The software is available in 6 languages: German, English, Spanish, French, Italian and Portuguese.

To install, extract the zip file into a single folder, then run the setup.

Minimum computer requirements:

Windows® 10 or later
4 GB RAM
10 GB of disk space
Microsoft Office® 2016 or later for viewing and editing docx reports.

Windows® and Office® are registered trademarks of Microsoft®.

SX-DMM v3.6 software
SX-DMM is a Microsoft Windows PC-compatible software package for a number of METRIX and CHAUVIN ARNOUX multimeters which allows :
- Acquire, record and process measurements from up to 4 instruments.
- Display data in the form of curves and tables.
- ... 
Compatible with the following devices:
METRIX multimeter:
MX5060 (USB link)
MTX3281 (optical link or Bluetooth link, depending on model)
MTX3282 (optical link or Bluetooth link, depending on model)
MTX3283 (optical link or Bluetooth link, depending on model)
MTX3281B (optical link or Bluetooth link, depending on model)
MTX3282B (optical link or Bluetooth link, depending on model)
MTX3283B (optical link or Bluetooth link, depending on model)
MTX3290 (optical link)
MTX3291 (optical link)
MTX3292 (optical link or Bluetooth link, depending on model)
MTX3293 (optical link or Bluetooth link, depending on model)
MX26 (optical link)
MX58HD (with RS232 option)
MD59HD (with RS232 option)
MX53C (with RS232 option)
MX54C (with RS232 option)
MX56C (with RS232 option)
MX556 (RS232 link)
MTX3250 (RS232 link)

METRIX brand HandScope :
OX5022 (in multimeter mode, optical/USB link)
OX5022B (multimeter mode, optical/USB link)
OX5042 (in multimeter mode, optical/USB link)
OX5042B (in multimeter mode, optical/USB link)

CHAUVIN ARNOUX multimeter:

CA 5292 (optical link or Bluetooth link, depending on model)
CA 5293 (optical link or Bluetooth link, depending on model)

CHAUVIN ARNOUX HandScope :
CA 922 (in multimeter mode, optical/USB link)
CA 942 (in multimeter mode, optical/USB link)

System :
Requires a PC compatible computer running one of the following operating systems:
- Microsoft Windows 11
- Microsoft Windows 10 32-bit (x86)
- Microsoft Windows 10 64-bit (x64)
- Microsoft Windows 8.1 32-bit (x86)
- Microsoft Windows 8.1 64-bit (x64)
- Microsoft Windows 8 32-bit (x86)
- Microsoft Windows 8 64-bit (x64)
- Microsoft Windows 7 32-bit (x86)

With a 1GHz processor or higher, 512MB RAM, 10GB free hard disk space, equipped with a serial or USB port.

Languages
Version in 5 languages: English, French, German, Italian and Spanish.

CP210x Universal Windows Driver v11.3.0                          USB drivers for Windows 10 / 11
CP210x_Windows_Drivers v6.7.3.zip                                   USB drivers for Windows 7/8/8.1

Firmware upgrade for the following oscilloscopes:

-MTX3x52 v1.x --> v1.07

-MTX3x52 v2.x --> v2.11

-MTX3x52 v3.x --> v3.05

-MTX3354 --> v3.05

-HandScope --> v1.05

-handscope B --->v2.01

- SCOPIX I: OX7042, OX7062, OX7102, OX7104 v1.0x --> v2.24
- SCOPIX II: OX7042, OX7062, OX7102, OX7104 v3.0x --> v3.24
- SCOPIX II: OX7202, OX7204 v4.0x --> v4.24
- SCOPIX III: v4.xx --> v4.24
- SCOPIX BUS: v5.xx --> v5.26

- OX6000 --> v1.09

- OX6000 II: OX6062, OX6202, OX6204 v2.x --> v2.24

UPDATE :

15/11/2024

NB: This upgrade does not concern the SCOPIX IV range.

Follow the recommendations in the file Instructions.pdf.

Installation:

To upgrade your oscilloscope, you must download the LoaderScope software.

The first time you execute the application, it will de-install the old version. You must then execute the program a second time to install the new version v3.2.

To update your product, first check your firmware (embedded software) version by pressing and holding the following two buttons: the center button + the MEM/REC button.

If your product has firmware version 1.xx or 2.xx, please download firmware version 2.xx.

If your product has firmware version 4.xx, please download the 4.xx firmware.

Embedded software update procedure

- Download the .bin file from our web site, then press and hold the MEM key and switch the instrument on by pressing the ON/OFF key. The instrument displays BOOT.

- Release the keys and the instrument displays COPY, indicating that it is ready to receive the new software.

- Connect the instrument to your PC using the USB cord provided.

- Copy the .bin file to the instrument as if were a USB key.

- When the copying is done, press the MEM key and the instrument displays LOAD, indicating that the software is being installed.

- When installation is done, the instrument displays PASS or FAIL according to whether or not the operation succeeded. If installation fails, download the software again and repeat the procedure.

- Then the instrument restarts normally.

CAUTION : After the firmware update, you will have to update the Bluetooth module.

With the software Data Logger Transfer, you will be able to :

• Setup the instruments,
• Download and display the trends,
• Display real time values,
• Display data in curves or table,
• Export automatic reports in Word (.docx format), 
• Export data into Dataview (.dvb files) or into Excel

Compatible with Windows 7, 8, 8.1,10 and 11

Attention: DataView is not provided with the software Data Logger Transfer

MTT Machine Tester Link Software V2.0.10

The MTT software allows you to control the instrument and analyse the measurements made with your CA 6161 / CA 6163.

Main functions

The MTT software is a tool for:

Configuration of the instrument,
Downloading and viewing data in memory,
Generation of reports from the measurement data.

• Configuration of the instrument,
• Downloading and viewing data in memory,
• Generation of reports from the measurement data,
• Creating Auto Script(s)
• Creating Customized Visual Inspection(s)

The software is available in 6 languages: German, English, Spanish, French, Italian and Portuguese.

To install, extract the zip file into a single folder, then run the setup.

Minimum computer requirements:

Windows® 10 or later
4 GB RAM
10 GB of disk space
Microsoft Office® 2016 or later for viewing and editing docx reports.

Windows® and Office® are registered trademarks of Microsoft®.

Thermographic analysis software equipped with Artificial Intelligence

The CAmReport AI software is equipped with a very simple user interface for:
> Analysis of the thermograms with the following tools:
   - Cursors (automatic display of the temperature at the point selected).
    - Thermal profile (automatic display of the Min/Max/Avg temperatures on the line).
    - A square or circle for area analysis
    - Polygons and polylines for more accurate analysis of certain areas in the thermogram.

Results tables quickly and automatically display all the information/analysis tools on the thermogram.

.

> Recovery of voice comments or related measurements
> Automatic merging of the thermal and real images recorded simultaneously

> The AI assistant analyses the equipment and automatically fills in observations and recommendations from your image,saving you valuable time.

> Automatic creation of reports for export in .pdf or .docx format.

Configuration required:

Windows 11 :
850 MB RAM for 32-bit
2 G for 64-bit
NET Framework 4.0 minimum

System: Windows 11

Language: Multilingual (15 languages including French, English, German, Spanish, Italian , Dutch, Polish, Romanian, Czech, simplified Chinese, Portuguese, Swedish, Finnish, Turkish, Korean)
        

Version: v3.0.0.0 compatible with camera model C.A 1950 & CA1954.