Software downloads

We have an Android application available for the PEL102 and PEL103 power and energy loggers.

This application then displays a screen from the remote power and energy logger on your smartphone or tablet.
This allows you to:

- see the measurements in real time,
- configure the instrument

To download the application, click on the link below. 

PEL 105 firmware update.

Instructions :
- Connect the PEL 105 to your computer
- Unzip the downloaded ZIP file 
- Launch FlashUp.exe 
- Load the update files included in the ZIP file ( PEL105.hex , PEL105_1.9.bin , wifi.hex)
- Choose Program Logger and DSP then click on Program

DataView v3.62.0016

Compatible instruments :

• PEL 102, PEL 103, PEL 104, PEL 105, PEL 106 power and energy loggers;
• F407 and F607 power and harmonics clamps;
• C.A 8220 and 8230 single-phase power analysers;
• Qualistar C.A 8331,8332, 8333,8334, 8335, 8435, 8436, 8336 and 8345;
• C.A 6526, 6532, 6534, 6543, 6547, 6549, 6550 and 6555 megohmmeters;
• C.A 6240, 6250, 6255 and 6292 micro-ohmmeters;
• C.A 6470N, 6471 and 6472 earth testers;
• C.A 6417 earth clamp;
• DTR 8510 ratiometer for transformers;
• Simple Logger II and L452;
• C.A 1110, 1227, 1246, 1821, 1822, 1510,1823, 10101, 10141 physical measurement devices;
• C.A 6116, 6116N and 6117 electrical installation testers

Languages

DataView is available in the following languages: German, English, Chinese, Spanish, French, Italian, Dutch, Polish, Swedish, Czech and Turkish

PEL 104 & PEL 106 Firmware update.

Instructions :

- Connect the PEL to your computer.

- Unzip the downloaded ZIP file.

- Launch FlashUp.exe and follow the instructions...

- Choose Program Logger only, then Program DSP only, then Program Wifi only.

With the PEL100 Android app, you can connect your Android device to a PEL instrument, using Bluetooth or Wi-Fi communication protocol; make a few settings, and get real time measurements.

The PEL100 Android app provides a fast, convenient and portable solution for working with a PEL instrument. And it allows you to easily connect to PEL instruments that may be placed in hard-to-reach locations.

Developments in this new version V 1.8.25 :

• Compatibility with Android 12
• Some bug fixes
• Real time measurements of engine parameters.

Concerning this last point, thanks to work based on a physical and statistical model, Chauvin Arnoux has developed a software sensor capable of providing the motor's electrical parameters.

We thus provide the motor's speed of rotation, efficiency and instantaneous torque.

An application note on this new function exists and is available on our website.

The PEL 100 application is free and remains available on GooglePlay in :

English, Czech, Danish, Dutch, Finnish, French, German, Italian, Norwegian, Polish, Russian, Chinese (Simplified), Slovak, Spanish and Swedish.

It is compatible with Android versions >= v6.0

USB - Serial adapter ((USB-RS232)

• Driver for HX0055 compatible with Windows 7
• Driver for HX0055B compatible with Windows 7 / 8.1 /10 /11

ScopeNet lets you, from your tablet or Android phone :
- View waveforms live
- Perform measurements and analyses
- Take screenshots of the instrument
- Take control of METRIX oscilloscopes.
The purpose of this application is to monitor waveforms and measurements on a series of METRIX OX7000, OX6000B or MTX105X oscilloscopes. The application is designed to work with oscilloscopes with an Ethernet connection, whether they are already configured with DHCP or not.

To connect to an oscilloscope :
- the scope's Socket Server must be started
- the ‘ScopeAdmin’ port must be set to 5000
- the ‘ScopeNet’ port must be set to 5010

The application offers full control over the oscilloscope, such as viewing measurements and starting/stopping acquisitions.
The application does not control the oscilloscope's internal file system or SD card.
ScopeNet can be used to view all instruments and their compatibility on the network.
All installed functions and modes are available with ScopeNet.

Do not use ScopeNet and SX-METRO simultaneously.
This application can be installed on tablets from 7 inches or SmartPhones from 4.3 inches (reduced command set).

Compatible with the following devices:
METRIX brand oscilloscopes:
OX6000B Series oscilloscopes
OX7000 Series oscilloscopes
MTX105x Series oscilloscopes

updated : 06/14/2016

The PEL Transfer software can be used to control the PEL51, PEL52, PEL102, PEL103, PEL104, PEL105, PEL106, PEL112, PEL113 and PEL115 power and energy loggers.

The PEL Transfer software is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Performing instantaneous acquisition operations,
• Displaying the data in the form of tables or graphs,
• Exporting the measurement data into (*.dvb files) or into a spreadsheet.

This evolution brings new features:
- Add czech language
- bugs fixed.

Compatible with Windows 7, 8, 8.1 , 10 and 11
Caution : DataView is not supplied with the PEL Transfer software

Here are the operating manual and quick-start guide for the PEL102, PEL 103 and PEL 104.

Firmware upgrade for the following oscilloscopes:

-MTX3x52 v1.x --> v1.07

-MTX3x52 v2.x --> v2.11

-MTX3x52 v3.x --> v3.05

-MTX3354 --> v3.05

-HandScope --> v1.05

-handscope B --->v2.01

- SCOPIX I: OX7042, OX7062, OX7102, OX7104 v1.0x --> v2.24
- SCOPIX II: OX7042, OX7062, OX7102, OX7104 v3.0x --> v3.24
- SCOPIX II: OX7202, OX7204 v4.0x --> v4.24
- SCOPIX III: v4.xx --> v4.24
- SCOPIX BUS: v5.xx --> v5.26

- OX6000 --> v1.09

- OX6000 II: OX6062, OX6202, OX6204 v2.x --> v2.24

UPDATE :

15/11/2024

NB: This upgrade does not concern the SCOPIX IV range.

Follow the recommendations in the file Instructions.pdf.

Installation:

To upgrade your oscilloscope, you must download the LoaderScope software.

The first time you execute the application, it will de-install the old version. You must then execute the program a second time to install the new version v3.2.

A new firmware version is available for the PEL112, PEL113, and PEL115.
This update includes the following new features:
• Fixes incompatibility with Mini94 clamp

Unzip the folder on your PC and launch the Flashup executable, select Logger and DSP, and finally launch Program

the device must not be added to PEL Transfer to prevent its configuration from being locked.